| | The device adapts high effect ceramics wave filler.
The body of distillation tower is made of stainless steel. In this
way it can prevent from the phenomenon of filler block caused by
scrap iron and its life is prolonged. All parts that will contact
ethanol in the device such as condensor, buffer tank, cooling snake
pipe are made of stainless steel in order to guarantee that the
finished product, ethanol, is not polluted. Model W still may use
disassembled U type heating pipe. When maintenance, it can be
removed out to the still. So it is very convenient to clean the
outer wall of heating pipe and the inner wall of still.
In Model ZW, the indirect heating still is omitted. The condensor
adapts calandria heat exchanger. Of course the screw plate heat
exchange and coil pipe cooler can also be provided as request. When
adapt coil pipe cooler, the buffer tank. |
| |
| | | | | The device is suitable for recovering dilute
ethanol of pharmaceutical industry, foodstuff industry, light
industry, chemical industry and so on. It is also suitable for
distilling solvents such as methanol and so on. Using this device,
about 300 of dilute ethanol can be distilled into 90～950 as
request. If the finished product has higher requirement to alcohol
content, the ratio of reflex should be increased. But the output
will be decreased. |
| | | | Model W has five specifications. Each specification is
equipped with distillation tower, still, condusator, buffer-tank,
measurer of specific gravity. In which, distillation tower of Model
W-200, W-300 is installed on the still directly and distillation
tower of Model W-400, W-500, W-600 is installed with still
separately.
Model ZW has two specifications. Each specification is
equipped with distillation tower, still, condusator, buffer-tank,
measurer of specific gravity.
Other auxiliary equipment and meters and instruments such as
measure tank, storage tank, pump, rotameter and temperature
indicator should be prepared by customer. Our factory can also
provide through additional process or order instead of customer as
request. |
| |
|
| | model | diameter of tower | productive capacity if raw material to be fed is 30%-40% | productive capacity if raw material to be fed is 60%-80% | 90% | 95% | 90% | 95% | W-200 | | 35 | 26 | 45 | 36 | W-300 | | 80 | 61 | 100 | 80 | W-400 | | 150 | 120 | 180 | 140 | W-500 | | 230 | 185 | 275 | 220 | W-600 | | 335 | 270 | 400 | 320 | ZW-200 | | 95 | 60 | 110 | |
|
|
|
|
